G4 Button Boards and G3 B&W Button Boards

Posted by: iBookdude458

G4 Button Boards and G3 B&W Button Boards - 02/01/06 08:06 PM

Hey anybody know how to mod a G3 B&W button board to work with an agp graphics g4 motherboard (the one with the internsl firewire 400 port). If not does anybody have a g4 buton board and cable that they are willing to give to me or sell at a reasonable low price.
Posted by: Waragainstsleep

G4 Button Boards and G3 B&W Button Boards - 02/12/06 01:31 PM

The G4 PCI uses the same front panel board as the G4 AGP, but the same logic as the B&W G3. I would imagine the G3 board should therefore work. Can't promise you that though.
Posted by: maestro

G4 Button Boards and G3 B&W Button Boards - 02/12/06 04:02 PM

I am pretty sure the connectors are different on them. Anil8tor modded his to work with it. Hopefully he will chime in and give you some advice on how to do it.

You could PM him.