Front USB

Posted by: Graphx

Front USB - 03/09/07 06:42 PM

Is there a way to attach usb connectors behind the zip bezel on a sawtooth case? Does anyone know of a company that sells such an adaptor for the case
Posted by: maestro

Re: Front USB - 03/09/07 06:54 PM

I actually, put a small usb hub in there.  I cut the bezel a bit and ran the wire to a internal connection on a usb 2.0 card i was using.  You could even run it to the outside to a stock one.  Get creative and make your own.
Posted by: szsiddiq

Re: Front USB - 03/09/07 09:08 PM

There are some USB hubs that are made to fit in a 3.5" floppy bay.

This ones overpriced, but you get the idea.    8)
Posted by: TCPMeta

Re: Front USB - 03/10/07 01:54 AM

I would go with the USB hub idea that maestro was talking about. Easiest way on that is to cut the ZIP slot bigger and use hot glue to hold the hub in place.