Mac Titanium 15" LCD hack

Posted by: Eckokat

Mac Titanium 15" LCD hack - 08/29/06 12:27 PM

Hi All!

I have an old Mac titanium with a 15" Lcd monitor and i would like to detach the montior (the hinges are completly cashed) and use it as a stand alone. I am seeking schematics as to what the pinout would be to hook up a db9 connector and what the voltage is. In other words what wires go where in the harness.

Better yet I was wondering if I could convert the video pinout to s-video.

Any help would much appreciated!!
Posted by: macDeviant

Re: Mac Titanium 15" LCD hack - 08/30/06 08:05 AM

not to discourage you but these are all topics others have started:

http://www.macmod.com/component/option,com_smf/Itemid,222/topic,540.0

http://www.macmod.com/component/option,com_smf/Itemid,222/topic,874.0

http://www.macmod.com/component/option,com_smf/Itemid,222/topic,406.0

http://www.macmod.com/component/option,com_smf/Itemid,222/topic,1930.0

http://www.macmod.com/component/option,com_smf/Itemid,222/topic,1848.0


it boils down to needing the right power inverter for the light, the controller board for the lcd signal, and finding out what pins do what([robably the most difficult since the information is scarce to comeby.) It will end up costing too much money and time for what the LCD is worth. I would spend that money on a good display.
Posted by: Eckokat

Re: Mac Titanium 15" LCD hack - 08/30/06 02:15 PM

Thanks macDeviant...
i just had it layin' around the shop and thought Hey this would be cool to use on my kitchen wall!
no such luck I guess.....