Loc: Alexandria, VA
Originally Posted By: Papa
The serrated knife edge should face the front of the car. This will improve the aerodynamics by allowing the car to "slice" through the air.
That, plus in its current configuration the knife looks to do more damage to the diminutive driver who presumably will be operating the vehicle than to the other racers (which I assume is the point of weaponizing the vehicle to begin with ;-)
All cars entered shall be constructed from the BSA official kit.
o Race cars may weigh no more than five (5) ounces (total weight) as determined on the official scale during race day inspection. Weight may be added to the car by you and will be considered part of the car for purposes of all measurements. “Weight” is considered to be any material on the car that is not provided in the kit. All weight must be securely fashioned to the car, e.g. by permanent glue, nails, or screws. Weights shall be passive.
o Race cars may be no longer than 7 inches, and no wider than 2 3/4 (2.75) inches, and no taller than 5 inches, as determined by the official gauges during race day inspection. Underside clearance of at LEAST 3/8 (1.75) inches is highly recommended, so that the car will run on the racetrack.
o The car must roll on the wheels and axles from the kit we sell you. The axles shall be firmly affixed to the wood of the car body. It must be obvious to the judges that the wheels and the axles from the kit are being used. Wheel treatment (smoothing and polishing of the hub and tread) may not result in substantial removal of mass nor in reducing the tread (track contact) width from the original kit wheels.
And because these rules are authored by the Boy Scouts of America, all cars must be straight!
"If it turns out that President Barack Obama can make a deal with the most intransigent, hard-line, unreasonable, totalitarian mullahs in the world but not with Republicans? Maybe he’s not the problem."
Loc: Alexandria, VA
Originally Posted By: steveg
The serrated edge IS facing front.
Ah. I for one was viewing the slice of butter as the seat of the vehicle. Your explanation that the car is oriented in the other direction makes sense, although in this configuration the knife is situated too far to the rear to pose any real threat to other cars (which, again, I take to the be the purpose -- otherwise, why a serrated knife?) ...
Xplain's use of MacNews, AppleCentral and AppleExpo are not affiliated with Apple, Inc. MacTech is a registered trademark of Xplain Corporation. AppleCentral, MacNews, Xplain, "The journal of Apple technology", Apple Expo, Explain It, MacDev, MacDev-1, THINK Reference, NetProfessional, MacTech Central, MacTech Domains, MacForge, and the MacTutorMan are trademarks or service marks of Xplain Corp. Sprocket is a registered trademark of eSprocket Corp. Other trademarks and copyrights appearing in this printing or software remain the property of their respective holders.
All contents are Copyright 1984-2010 by Xplain Corporation. All rights reserved. Theme designed by Icreon.