Ethernet cable fail | Servers, Security, and Networking | AppleCentral Forums

You are not logged in. [Log In] AppleCentral » Forums » Mac » Servers, Security, and Networking » Ethernet cable fail

Topic Options

Hop to:

#551007 - 02/09/11 01:28 AM Ethernet cable fail
MacBozo Nut Dood Registered: 04/21/02 Posts: 17704 Loc: Pinellas Park, Florida	The Cat5e cable that runs from my router to the room that my father-in-law occupies while he is here and connects his G4-400 PowerBook to the 'net seems to have failed. I tried another, too short to run through the attic, cable and that worked, so it's off to find a 40 - 50 foot cable and crawl the attic. _________________________
Top

#551018 - 02/09/11 05:14 AM Re: Ethernet cable fail [Re: MacBozo]
Reboot Muhahahaha Registered: 04/22/02 Posts: 15033 Loc: Columbus OH	Do you have the crimp tool to replace the ends? _________________________ AppleCentral Trivia MM-MCF Trivia Call the Doctor
Top

#551022 - 02/09/11 09:00 AM Re: Ethernet cable fail [Re: Reboot]
scottyb Where's the cache? Registered: 01/16/08 Posts: 233 Loc: Alaska	It seems kind of strange that a cable would just "fail", especially one that stays put like that. Just a WAG, but could your router be failing, and losing it's ability to push a signal through such a long cable? _________________________ If you're not outraged, you're not paying attention...
Top

#551030 - 02/09/11 12:49 PM Re: Ethernet cable fail [Re: scottyb]
NucleusG4 Master•Blaster Registered: 04/20/02 Posts: 12483 Loc: Miami, Fl.	Rats? I remember running all new phone and ethernet and coaxial through my loooow Florida attic several years back. Ugh. _________________________ http://davidbearphotography.com/
Top

#551035 - 02/09/11 02:26 PM Re: Ethernet cable fail [Re: Reboot]
MacBozo Nut Dood Registered: 04/21/02 Posts: 17704 Loc: Pinellas Park, Florida	Originally Posted By: Reboot Do you have the crimp tool to replace the ends? No crimp tool on hand. New cable is only $20 at Best Buy. _________________________
Top

#551036 - 02/09/11 02:28 PM Re: Ethernet cable fail [Re: scottyb]
MacBozo Nut Dood Registered: 04/21/02 Posts: 17704 Loc: Pinellas Park, Florida	Originally Posted By: scottyb It seems kind of strange that a cable would just "fail", especially one that stays put like that. Just a WAG, but could your router be failing, and losing it's ability to push a signal through such a long cable? Tried a ~20 ft. cable and that worked just fine. _________________________
Top

#551043 - 02/09/11 05:01 PM Re: Ethernet cable fail [Re: MacBozo]
Reboot Muhahahaha Registered: 04/22/02 Posts: 15033 Loc: Columbus OH	Just a thought, if you weren't in a big hurry, you could get; One of these http://www.outletpc.com/c0279.html A couple of packs of these http://www.outletpc.com/c0267.html And one of these http://www.outletpc.com/wj8174.html For $25 and change shipped, and be set up for the future. Ethernet cables can be such a rip. _________________________ AppleCentral Trivia MM-MCF Trivia Call the Doctor
Top

#551055 - 02/09/11 11:09 PM Re: Ethernet cable fail [Re: Reboot]
MacBozo Nut Dood Registered: 04/21/02 Posts: 17704 Loc: Pinellas Park, Florida	Originally Posted By: Reboot Ethernet cables can be such a rip. That's why I found one for $20 instead of $50. Hopefully, the TiPB will die and we can just hook him up to the wireless network in future visits. _________________________
Top

View All Topics

Moderator: Acumowchek, MacGizmo, Reboot

SPREAD THE WORD:
Slashdot
Digg
Del.icio.us
Reddit
Newsvine

AppleCentral. www.applecentral.com

Main office: 805-494-9797

Xplain's use of MacNews, AppleCentral and AppleExpo are not affiliated with Apple, Inc. MacTech is a registered trademark of Xplain Corporation. AppleCentral, MacNews, Xplain, "The journal of Apple technology", Apple Expo, Explain It, MacDev, MacDev-1, THINK Reference, NetProfessional, MacTech Central, MacTech Domains, MacForge, and the MacTutorMan are trademarks or service marks of Xplain Corp. Sprocket is a registered trademark of eSprocket Corp. Other trademarks and copyrights appearing in this printing or software remain the property of their respective holders.

All contents are Copyright 1984-2010 by Xplain Corporation. All rights reserved. Theme designed by Icreon.