Looking to sell my completely custom 15" Mac Book Pro that has 2 yes that is 2 CPU's my friend actually soldered a 2nd 2.5 core 2 duo CPU on to the board i have pictures to prove this it also has a mat screen mod and capable of doing 3 finger touchpad right now and has the capability of doing 4 fingers with the proper drivers or software but it is in about a 6 or 7 of 10 condition and has a titanium reinforced case which makes it almost un breakable
email me at [url=mailto:firstname.lastname@example.org]mailto:email@example.com[/url] for more info i will be posting pictures shortly
i know that but it does have 2 Cpu's iceclean says so with a 6mb cache and if you look at the benchmark teast that i posted it will confirm this i will take it apart if need b eto show the buyer that there are 2 cpu's
Then it is not a MacBook Pro as you claim simply because it is not possible to solder in an extra CPU to any of Apple's x86 based products.
In fact, I would be absolutely shocked to see even a high end PC laptop were the manufacturer wasted so much space and materials on the PCB just for an empty set of pads that would allow for a second CPU to be soldered in by a rare person with extremely expensive equipment. If anything they would stick the CPU in themselves.
Unfortunately there is no market for such a beast as it would be useless as a portable (big/hot/power hungry) and it would also be _very_ expensive.
Sounds quite a bit like benches/sysinfo was faked and you were lied to.
So yea, we are going to need decent pictures.
On a side note it looks like a 2.5Ghz w/ 6MB L2 for notebook would be a T9300. But (please correct me if I am wrong) isn't the T9300 not designed for going dual?
actually the old macbook pros had an extra spot for a 2nd cpu if you research into the arcitecture of the board itself and if you know the program iceclean i will be posting screen shots of what it says this system is and yes the total cost of the laptop when it was built was around 12k or more but i am looking to get maybe 3k as i am in need of money. also if neccessary i will remove the keyboard and show you were the 2nd cpu was soldered on but i will not simply just do this inless someone is serous about making me an offer as i am not the original builder of this computer and do not want to keep removing the keyboard but i will prove it if need be
I call shenanigans. Even if there is the physical space for a processor I doubt highly that there's the additional architecture necessary for a second cpu. No one here is going to make an offer without pictures. If you're not willing to post pictures without an offer, than it looks like you'd better move on.
just because you glued another CUP on the board beside the original does not mean you magically have a skulltrail laptop, like maximus said, give us proof, including pics of the system recognizing that it works
Xplain's use of MacNews, AppleCentral and AppleExpo are not affiliated with Apple, Inc. MacTech is a registered trademark of Xplain Corporation. AppleCentral, MacNews, Xplain, "The journal of Apple technology", Apple Expo, Explain It, MacDev, MacDev-1, THINK Reference, NetProfessional, MacTech Central, MacTech Domains, MacForge, and the MacTutorMan are trademarks or service marks of Xplain Corp. Sprocket is a registered trademark of eSprocket Corp. Other trademarks and copyrights appearing in this printing or software remain the property of their respective holders.
All contents are Copyright 1984-2010 by Xplain Corporation. All rights reserved. Theme designed by Icreon.