looks amazing!!! what are the specs on the machine?
_________________________
>Mac mini PPC / 1.42 Ghz / 1GB RAM / 74.41GB 4200rpm 2.5" / Airport + Bluetooth / 10.4.7 / 20.1" LG widescreen >G4 400 PPC / 20 gig / 768MB RAM / ZIP drive / 10.4.7 /17" apple SD / Back up system >Powerbook Titanium 1Ghz / 40GB / 512MB RAM / mashed up and waiting for a good mod! >Macintosh SE/30
Thanks for the comments guys. Well for this puter I used a PowerBook G4 with 800Mgz and 500 gigs or ram. I picked it up on craigslist for $350. I just could not see myself tearing apart a brand new Mac Book Pro for my initial build. This particular laptop made this project a challenge to complete. Since all the ports are in the back and the LVDS cable being so short, it was hard to position the monitor where I wanted. Also finding where to tap into on the logic board to provide power for the LED on the power button was also a challenge. I found a few places that would be powered all the time even if the laptop was off. After searching for a while I found this spot that provided 5V only when the laptop was powered. So I was able to solder right to it:
Here is a shot of an early comp:
I want to build a whole line of "Evil" macs so I just recently came up with this new one: This one is still on its very very early stages. I'm going to be chopping up a G4 Quicksilver for this one. I'm having too much fun these days.