Hey dudes, me again.

Remember that faulty HD I had in my newly acquired Smurf?
I dropped it into my REV. C iMac, since it had worked ther per-
fectly before. I then installed 9.2.2 on it, no problems at all, but
now it will only boot in open firmware mode or from the CD.

Anyone know a way to quit open firmware or why thi could be? I
would be greatly helped.

Three Cheers,
PowerMac G5 Dual 2.0Ghz, 1536Mb RAM, 160Gb HD, 23" Studio Display
iMac 333Mhz, 160Mb RAM, 6Gb HD
PowerMac 8500 120Mhz, 80Mb RAM, 2Gb HD, 17" AppleVision Display
Mac IIsi 20Mhz, 16Mb RAM, 200Mb HD, 15" Sony Trinitron Display
3G iPod 40Gb
512Mb iPod Shuffle