i want to make my G3 B&W case shiny like a g4. how should i do it. I think that i should use very fine grit sand paper to san of the opacity of the sides and handles and spray it down with transparent gloss paint
Macbook Pro 15.4" 2.53GHZ Core 2 Duo 4GB RAM Powermac G5 Dual-Core 2.3GHZ 2GB Ram Powermac G4 Quicksilver 733MHZ 1.25GB Ram iPod Video (1st Generation) 60GB
The G4 sawtooth panels can be swapped onto a smurf, not as much fun but it would work. The smurf plastics are a semi opaque plastic while the sawtooth used a clear acrylic with the inside painted to achieve its look.
Mordasky's right. Unfortunately. The plastics on the B&W are a different composition of plastic than the latter G4's which were a clear polycarbonate.
Now, if you wanna shine those plastics as much as possible (which may not be much) go after them with a 1500 and a 2000 grit sand paper. then, if you have the ability, a buffer and some turtle wax brand rubbing and/or polishing compound. All can be found at the local auto parts store, should you decide to go after it
Electricity tastes good. No, seriously.
Xplain's use of MacNews, AppleCentral and AppleExpo are not affiliated with Apple, Inc. MacTech is a registered trademark of Xplain Corporation. AppleCentral, MacNews, Xplain, "The journal of Apple technology", Apple Expo, Explain It, MacDev, MacDev-1, THINK Reference, NetProfessional, MacTech Central, MacTech Domains, MacForge, and the MacTutorMan are trademarks or service marks of Xplain Corp. Sprocket is a registered trademark of eSprocket Corp. Other trademarks and copyrights appearing in this printing or software remain the property of their respective holders.
All contents are Copyright 1984-2010 by Xplain Corporation. All rights reserved. Theme designed by Icreon.