I have a B&W motherboard that I want to put in a beige g3 case. Are the power supply's for these two machines the same or do I need to make some changes?
No, they are not the same. The Beige G3s ps is a atx power supply. You need to snip one wire on it. I cannot remember which right now, but you can google up "atx ps in B/W G3".
Beige is straight ATX. B&W usually requires snipping a white wire. Not sure the Beige PSU follows the ATX colour conventions though, so check your pins.
No, they are not the same. The Beige G3s ps is a atx power supply. You need to snip one wire on it. I cannot remember which right now, but you can google up "atx ps in B/W G3".
Wouldnt you just be better to use another ATX PSU, with more wattage that a 200w psu??
Yea that is probably the route that I will take in the end. I mainly wanted to test the board to make sure everything is working. Another question along the same lines, when I change a zif processor do I need to change the jumpers to make it register as the new speed? I have just been playing with beige g3's all night.
oooh pretty
Previous Topic
Index
