Is there away to adapt a G4 daughter card that is too big for the motherboard to work on the motherboard? I'm not talking about adapting a different connector. the same connector but the card is too long and hits the IDE bus connector. is there an adapter to raise the card connector on the bord up a little to connect the card?
_________________________
Macbook Pro 15.4" 2.53GHZ Core 2 Duo 4GB RAM Powermac G5 Dual-Core 2.3GHZ 2GB Ram Powermac G4 Quicksilver 733MHZ 1.25GB Ram iPod Video (1st Generation) 60GB
No, there are no such adaptors. The only thing you can do is cut off the ide conn. That would be ok if you bought a hard drive contoller for a pci slot. It would access disks much faster too. Check out my article on this site for Firmteks sata card.
Previous Topic
Index
