If the drive is large enough to warrent it, (And you are not planning on repairing Mr.Pismo ) You could by an external firewire enclosure for it, easy to do, very nice. I did it with a desktop Hard Drive I had, It rocks.
Well, stand alone solutions do exist but are much more expensive than the enclosure kits. An external 2.5" firewire/USB kit can be had for under $20 on ebay. Really Maestro's suggestion (internal Adaptor) is the easiest and cheapest, Are you looking to connect the drive to a PC? that would be your only real challange with either the internal or the external solution, we could help you though. We could also help you figure out how to fix the Pismo, if you'd like.
Just wanna connect it to a Mac, which will hopefully see it as an external drive and let me get the stuff I need off.
I have a G4 Powerbook with a USB & Firewire, running OSX so I'm hoping to conect to that. the drive in the Pismo is OS9, though I'm only after data files, so am hoping that's not gonna be an issue.
It would be great if someone would be able to guide me in how to fix the Pismo, but honestly, I've never even used a soldering iron, so not sure I'm up for the job. If anyone on here is in London, UK and wants to help - let me know! :-)
In the meantime though, I'll get scouting eBay for an external kit for the drive. Do they have to be Mac compatible, or will anyone do?
Also, what determines whether I make it USB or Firewire when I put the drive in?
Searching for "2.5 firewire" on ebay will turn up lots of kits, there is no difference between the kits as far as Mac vrs PC is concerned. Any one will do. Basically you put the drive in the case and the case has either a Firewire, USB or both ports on the back, plug an ordinary cable in just like any other external device. Personally I would reccomend firewire over usb, Kits with both ports will use which ever cable you plug into the back after the drive is in. If your powerbook has USB 2.0 than either is fine, But if its a titanium, then firewire is the way to go. Once the drive is installed in the case, just plug in the cable and it should mount on the desktop fine.
Just be sure to buy a 2.5" (Laptop Drive) enclosure and not a 3.5" (Desktop Sized) one
Ok - thanks for all the info! I'll get that and set to work this weekend.
I think the problem with the Pismo is probably a ruptured power socket or something, as it was working fine till it slid off my mate's lap onto the floor. Now it just won't startup, and the battery's got no power so can't startup from that. :-/
Would fixing the power bit be easy or difficult. Like I said, I'm no expert & don't have a soldering iron.... I'm guessing it's difficult.
Well, first would try to find out if it is the DC power board, either by physical inspection (is it visibly damaged) or indirectly: Find someone else with a pismo and try thier battery to see if the computer starts. If it does, then this small power board is most likley the problem. It is not hard to replace, though you will have to take apart most of the laptop to do it. http://www.powerbooktech.com has a take apart guide, they sell the part too but thier price is too high if you ask me.
Hey if you decide not to repair please post it in the Trading Warehouse, I am sure someone here would be interested
Macbook 2.1 core duo 1gig 160gb sata iMac g5 w/1 gig 160gig all-in-one and SWEET! iBook G4 IGhz Quicksilver Dual 800's iPod touch "Guys, I think we just lost the platform here" Pete Conrad When in doubt, try SCE to AUX
I say fix the Pismo. Does the battery charge at all if you plug into AC power? If itt charges, but the Pismo won't boot, then the logic board has probably gone so maybe then you could give up on it, but if not it could also be the AC/sound in board or the battery/trackpad board.
If you have a circuit tester you can find out enough about the power system to know where the problem lies. If the battery isn't charging, it could still be the logic board, but might not be. If you can take the logic board and AC/sound board out, you can test with a circuit tester to see if the power is getting through. Remove both (and the battery/trackpad board too if you like) and connect them together as they would be when the machine is whole. Use one probe from the circuit tester on the power jack (where you plug in the PSU normally) and test each pin in turn where the battery is normally connected. It doesn't matter which pins have what voltage or anything, you just want to know if any is getting through. If its going all the way through, but not charging, then the battery is dead (unlikely). If you get no signal at all from any of the battery pins, then remove the battery board and test the pins where it connects to the logic. If you get power now, the battery board is gone. These are cheap enough to replace. If you still have no power, you can check to see if the AC board is working by disconnecting it from the logic board and testing for a signal between the power jack and the pins which connect to the logic board. Again, the AC board should be fairly cheap to replace. You can also check the logic board itself by testing between the pins where the AC board connects, and the pins where the battery board goes.
This should allow you to determine which part to replace. If you like the idea of learning this sort of thing then the Pismo is a good machine to learn with. Later laptops get progressively more difficult to work on. Trust me.
On the other hand, if the files you want to retrieve are small, undo the seven screws on the bottom of your G4 and put the Pismo drive in that. Then boot up and email the files to yourself. Then swap back and download them again. Removing HDs from an early TiBook is just as easy as removing them from the Pismo.
Xplain's use of MacNews, AppleCentral and AppleExpo are not affiliated with Apple, Inc. MacTech is a registered trademark of Xplain Corporation. AppleCentral, MacNews, Xplain, "The journal of Apple technology", Apple Expo, Explain It, MacDev, MacDev-1, THINK Reference, NetProfessional, MacTech Central, MacTech Domains, MacForge, and the MacTutorMan are trademarks or service marks of Xplain Corp. Sprocket is a registered trademark of eSprocket Corp. Other trademarks and copyrights appearing in this printing or software remain the property of their respective holders.
All contents are Copyright 1984-2010 by Xplain Corporation. All rights reserved. Theme designed by Icreon.