#3618 - 04/06/0202:40 PMGet your post-production iPods engraved here.
Since Apple does not offer the ability to engrave iPods already purchased, I have been feverishly looking for alternatives to have this done properly post-production. <br><br>It looks like Apple is using a YAG laser. I'm told these systems start at around $75K so this would be cost prohibitive for most jewelers. Below are some examples for your information if you are interested. Scroll down to the "decoration/ stainless steel" example. (*Picture example there). Listed below are the settings.<br> <br>Decoration<br><br>Method: engraving<br>Laser type: 90W Q-Switch Nd:YAG<br>Marking time: <15 seconds<br>Material: stainless steel<br>Mark: logo production <br><br><br>http://www.amark.co.uk/Industrial_Applications.htm<br><br>I found a company in San Jose, CA who will do this process[Same parameters and character limitations, although they might be flexible on this(?)] for $35.00 for a single iPod and only $50.00 for up to 3 iPods at a time. I think thatŐs very reasonable given that they normally charge $150.00 for a single setup, fixing lenses and such. They felt confident there would be no problem in doing this process with the iPod intact as any heat generated is so localized and short lived it would not cause any damage to any internal components. That said, and out of an abundance of caution, one might want to wait to have this done after their Ipod's 90 day warranty has expired since I have no idea what Apple's policy might be on warranty work done on iPods that have been lased post-production. I would give out the engraving company's web site, but they would prefer to be contacted initially by e-mail over that of the phone. Savvy users wanting more info might work around this doing a search with Sherlock and/or Google ;=) Their e-mail is as follows: <br><br>email: firstname.lastname@example.org <br><br>No, I am in no way affiliated with them, but they were very kind & helpful and I thought I would help them generate some business as well as help all you who have post production iPods and would like them engraved "properly." <br><br>Now, lets have some fun with this since I have not decided what to put on my two other iPods. Apple engraved my third. What kind of clever, humorous inscriptions would you folks place on yours. (Two lines of text not to exceed 27 characters each). (I know this has been done on a competitive site, but the users here seem to be more adult). <br>:D<br><br>For example, certainly not the best... "Bill Gates: Eat your<br> heart out!"<br><br><br>-------------------------------------------<br>RWoelk <br>Generating 2048 bits of randomness...<br><br>Only the educated are free! -Epictetus
#3619 - 04/09/0212:52 PMRe: Get your post-production iPods engraved here.
Update: <br><br><br>I was just informed that the e-mail address I posted above, although correctly transcribed, is in error and causing interested parties to have their e-mails bounced back. <br><br>I called the company to alert them of this issue and they will be in contact with their web master forthwith. More importantly, they gave me permission to post their web site which will have the correct contact information including phone numbers. <br><br>The link is as follows: <br><br>http://www.zapomarks.com/contact.htm <br><br><br><br>-------------------------------------------<br>RWoelk <br>Generating 2048 bits of randomness...<br><br>Only the educated are free! -Epictetus
Xplain's use of MacNews, AppleCentral and AppleExpo are not affiliated with Apple, Inc. MacTech is a registered trademark of Xplain Corporation. AppleCentral, MacNews, Xplain, "The journal of Apple technology", Apple Expo, Explain It, MacDev, MacDev-1, THINK Reference, NetProfessional, MacTech Central, MacTech Domains, MacForge, and the MacTutorMan are trademarks or service marks of Xplain Corp. Sprocket is a registered trademark of eSprocket Corp. Other trademarks and copyrights appearing in this printing or software remain the property of their respective holders.
All contents are Copyright 1984-2010 by Xplain Corporation. All rights reserved. Theme designed by Icreon.