Loc: Vancouver, BC Canada
From what you're saying you have either a Sawtooth or a Gigabit so you're good to go for the front, top and back.
Regarding the side panel apple logos.. its a separate piece (apple and stem) thats glued on. I found a standard butter knife to be the best tool. I simply stick the tip between the edge and the logo and slowly pried it up. Once you get the knife blade under it about an inch start to slowly work it around full 360. By the time you're back to where you started it should just pull right off. Be sure not to use too much force or you will break the logo. Happened to me the first time I tried it and I had to krazy glue it back together. The stem pulls out quite easily.
Mac mini C2D 1.83GHz - 2GB RAM - 200GB 7200rpm HD Sawtooth w/G4 1GHz - 1GB RAM - SIIG SATA w/2x1TB HD B&W w/G4 600MHz - 1GB RAM - 2x80GB HD Sawtooth G4 400MHz - 512MB RAM - 40GB HD Dell Ultrasharp 2007WFP 20" Widescreen LCD 2.94TB Total Storage
Xplain's use of MacNews, AppleCentral and AppleExpo are not affiliated with Apple, Inc. MacTech is a registered trademark of Xplain Corporation. AppleCentral, MacNews, Xplain, "The journal of Apple technology", Apple Expo, Explain It, MacDev, MacDev-1, THINK Reference, NetProfessional, MacTech Central, MacTech Domains, MacForge, and the MacTutorMan are trademarks or service marks of Xplain Corp. Sprocket is a registered trademark of eSprocket Corp. Other trademarks and copyrights appearing in this printing or software remain the property of their respective holders.
All contents are Copyright 1984-2010 by Xplain Corporation. All rights reserved. Theme designed by Icreon.