You need the sawtooth logic board as well as the front power panel, either an original from another sawtooth or wire your own but the B&W one will not work. Only one or two of the MB standoffs don't line up. Also the rear ports are not the same, just leave the bezel off or make your own from some scrap material. This mod is not to difficult to pull off.
_________________________
PB G4 15" 1.2ghz - Pismo G3 400 mhz - iBook G3 500 "Jukebox"
"SawSmurf" G4 500 - Quicksilver G4 Dual 1ghz modding...