Truthfully, you are unlikely to find those pinouts on the net. Using Laptop LCDs as standalone monitors has been a dream of many people. At least one other has asked such a question on MacMod before now. LCDs tend to have different pinouts from model to model. Seems stupid to me, but as with most of these things, it was probably done that way deliberately to stop people doing exactly what you intend. I have always said that the 'easiest' way to accomplish this is to find a standalone external LCD which uses the exact same model of LCD panel as you have, then find a cracked one cheap and swap the panels, rehousing the whole thing if you feel the need. Of course this relies on someone actually having built and sold such a monitor, and in sufficient numbers that you are likely to find a cracked one. You may find the pinouts are printed on the PCB on the panel itself. Not all of them have this, but some do, including some of the ones used by Apple. The hard part here (if you do find them) is deciphering them, as they will more than likely be abbreviated to two or three letters or symbols each, and you will need to know what they all mean. Then you can work out the pinouts at the logic board end using a multimeter.
Xplain's use of MacNews, AppleCentral and AppleExpo are not affiliated with Apple, Inc. MacTech is a registered trademark of Xplain Corporation. AppleCentral, MacNews, Xplain, "The journal of Apple technology", Apple Expo, Explain It, MacDev, MacDev-1, THINK Reference, NetProfessional, MacTech Central, MacTech Domains, MacForge, and the MacTutorMan are trademarks or service marks of Xplain Corp. Sprocket is a registered trademark of eSprocket Corp. Other trademarks and copyrights appearing in this printing or software remain the property of their respective holders.
All contents are Copyright 1984-2010 by Xplain Corporation. All rights reserved. Theme designed by Icreon.