If you have any of the inner case panels to go with the new board, you might have more choice in what you can fit into your B&W case by swapping some of those too.

As for the connections on the sawtooth board, if you mean that short white connector between the PCI slots and the Airport card socket, its for an internal dial-up modem board. The last powermac with on board SCSI was the Beige G3 to the best of my knowledge. All subsequent ones with SCSI drives were shipped with Adaptec SCSI cards in.

Post edited by: waragainstsleep, at: 2005/07/02 13:03