What the ribbon cable allows is to have wires come from one board to another in a very narrow passage. If your mod will not have a narrow passage, just take wires from one board to the other. Remove the ribbon cable if you can. If your mod still requires a narrow space, then work with it, but if not go with straight wire, and no splicing required.

It should not be too hard, and I would suggest getting a 'solder sucker' that is meant to remove solder. Well, technically it's called a Vacuum Desoldering tool. Kind of looks like a syringe that you point at it and when you hit a button, pulls the hot solder into it. It's like $8 at Radio Shack. It will make removing the cable and ZIF connectors pretty easy. The part number is 64-2098 if you need it.
_________________________
MacBook 2GHz Intel Core 2 Duo w/ 2GB DDR2 RAM & 120GB SATA 5400RPM HDD
Canon Rebel XTI
Google Cr-48 Beta Laptop